Guidelines for common dental problems
There are several key factors to consider in the design of tooth crowns. First, appropriate raw materials with which to make the crown must be identified.
Metals are frequently used in crown construction because they have good hardness, strength, stiffness, durability, corrosion resistance, and bio-compatibility. Metals formulated as mixtures of mercury have been historically used. In fact, one source notes that metal amalgam was used as a dental restorative as early as 1528.
The prosethedontist may design the crown's surface with mechanical undercuts to give the coating a better grip. Resin coatings have relatively low mechanical strength and color stability and poor abrasion and stain resistance as compared to porcelain.
Before beginning dental crown process, the dentist may need to prepare the area where the crown is to be installed. This may require the removal of 2-3 millimeters of tooth structure from the four sides and the biting edge. Then, an impression of the tooth is taken to record its shape. This step uses impression plaster which is the softest and fastest setting type of dental plaster. The impression plaster is mixed with a small amount of water until it is fluid. This slurry is placed in a tray that is fitted over the teeth. The tray is held still in place until the plaster hardens. When the tray is removed from the mouth, it retains a three dimensional impression of the tooth that is to be covered. This impression is a negative, or reverse, image of the tooth.
more...
With an overall success rate of about 95% and almost 50 years of clinical research to back them up, dental implants are frequently the best treatment option for replacing missing teeth.
The team is organized as soon as the decision for placing a dental implant is reached. Following an evaluation that includes a comprehensive examination, x-rays and a consultation with the patient and members of the implant team, the oral and maxillofacial surgeon surgically places the posts, or implants, in the patient's jaw.
Because of the remarkable advances in dentistry in recent years, dental implants offer an effective solution to many of dental problems.
Similarly, a removable partial denture may contribute to the loss of adjacent teeth. Studies show that within five to seven years there is a failure rate of up to 30% in teeth located next to a fixed bridge or removable partial denture.
Your replacement teeth will be attached to the implants to allow excellent function and prevent bone loss. The implants will serve as a stable support that tightly locks into your replacement teeth and dentures to prevent slipping and bone loss.
more...
The maintenance of your dental Laminates is relatively simple. And main suggestions here: please brush and floss as you normally would to prevent oral hygiene problems.
Your dentist places the Laminates with water or glycerin on the teeth to verify their perfect fit and the shade or color. The color cannot be changed after the Laminates are adhered to your teeth. The tooth is then cleansed with chemicals to achieve a durable bond. Once the glue is between the veneer and your tooth, a light beam is used to harden the glue/cement.
Teeth are prepared for Laminates by lightly buffing to allow for the small added thickness of the veneer. Tooth Laminates are thin like contact lenses, and will usually only need tooth reduction of 0.5mm to 1.0mm. If a drastic change is being made for the result you want, reduction may be 1.0mm to 2.0mm. A mold is taken of the teeth, from which the Laminates are modeled after.
more...
The dentist will then make an impression, which will serve as the model from which the bridge, false tooth and crowns will be made by a dental laboratory. A temporary bridge will be placed for you to wear while your bridge is being made until your next visit. This temporary bridge will serve to protect your teeth and gums.
Your cosmetic dentist will usually be able to spot problem areas in your mouth that might lead to tooth damage and a need for crowns. Chewing patterns play a big role as well. By selectively grinding the tips of your middle and back teeth (called cusps) will alter your bite to reduce the stress on at-risk teeth.
The most common method of teeth straightening remains standard orthodontic braces. Archwires, springs, and rubberbands apply pressure to the individual teeth by means of brackets that are glued onto their surface. Regular visits are required to the orthodontist in order to tighten wires as needed and make other adjustments. At each visit, the wires will be tightened slightly to renew pressure and push them toward their intended position. Additional wires, rubberbands, and headgear may be prescribed to help move the teeth into their ideal position as quickly as possible. When the teeth have all been repositioned, the brackets will be removed and a retainer must be worn to prevent relapse for some period of time.
There are many different causes that lead to stained or discolored teeth. Some of the most common causes are everyday foods and drinks--coffee, tea, soda, and red wine all have a staining effect on tooth enamel. Smoking will also darken teeth. Some medications, if taken during early childhood, can result in teeth that are discolored.
more...
